FLOS OUTDOOR outdoor wall lamp CAMOUFLAGE 140 2700K (Orcia cream stone - aluminum and polycarbonate)

Collection of products for outdoor use, for wall installation with LED light source Dissipating aluminum body with diffuser in transparent polycarbonate. The Crema d'Orcia and Basaltina stone finishes are made by fastening high-strength, high-resistance adhesive to a stone plate created by means of mechanical machining from a solid block.
The concrete finishing is made by fastening a poured cement plate reinforced with fiberglass using a single component high strength, high-resistance adhesive. The Primer version is painted after installation with normal water-based colors (tempera, stucco, water-based paints) to ensure maximum uniformity with the architecture. The aluminum versions are finished with a high-resistance coating: after a sandblasting treatment of all components to make the surface porous and ensure a greater adhesion of the paint, the external coating is applied with a double layer with epoxy powders according to the QUALICOAT standard. The first layer of epoxy powder gives chemical and mechanical resistance, the second finishing layer of polyester powder ensures resistance to UV rays and atmospheric agents.
The painted surfaces are treated with alkaline and acidic washes, then rinsed with demineralized water, subjected to a chemical conversion treatment to protect against oxidation. Upon commercial and technical evaluation, it is possible to create customized versions with other materials on request. We recommend using a connection system with a degree of protection greater than or equal to the degree of protection of the luminaire. 24V power source not included. Includes power cable of 100 mm. The driver can be installed remotely (installation box not required) or housed at the back of the luminaire by means of a suitable optional remote housing. Mid-Power Led:8W - 474lm - 2700K - CRI> 80 - Beam° 157