The WOODSTOCK table has a 9-cm-thick tabletop in solid American walnut composed of wooden boards of different dimensions laced face to face and glued together. Because of their extraordinary thickness, these tops need a selection and drying process that is much longer than usually adopted for a top whose average thickness is 4 or 5 cm. The delivery-time of this item is therefore quite long– about 4-6 months depending on the availability of the material. We remind you that wood is a “living” material, which will interact with the surrounding environment for the whole life of the furniture and be subject to heat and, above all, to different degrees of humidity. Too low a level of humidity (for example, in a room heatedby warm air blowing fans, wall heating systems or floor level heating coils, without proper humidification) can produce splits in the wood. Besides, we recommend not putting the table too near to direct heat sources like stovesor fireplaces and to maintain an ideal humidity level of between 50% and 55%. If small splits appear in the wood (caused by changes in the environmental conditions, asexplained above), they can be repaired using a special but commercially easily available “soft wax” which comes in the form of different coloured sticks. We suggest you use some eco-friendly, single component water-based filler.
Woodstock Sherwood Base is a table of Riva 1920 featuring a 9 cm-thick solid wood top, available in American walnut, in peculiar knotty quality, with Sherwood base. Table base in naturally coloured laminated iron, finish oil.